5.0
180+ reviews
QueenTile Stone-Coated Steel Roofing in Orlando, FL
Fiddler’s Roofing installs QueenTile stone-coated steel roofing for Orlando homes and surrounding Central Florida communities. Formed steel panels with natural stone granules create the appearance of clay tiles, wood shake, or slate.
QueenTile is our primary stone-coated steel brand. We help homeowners compare profile, color, roof geometry, cost, installation requirements, and warranty coverage before choosing a new roof.
Book An Inspection Now
- Florida Certified Roofing Contractor
- License CCC1333004
- Serving Central Florida Since 2003
- Financing Available
What Is a Stone-Coated Steel Roofing System?
A stone-coated steel roof uses shaped steel panels protected by an aluminum-zinc coating, bonded stone granules, and a clear acrylic glaze. The steel forms the panel, the metallic coating helps protect the substrate, and the textured surface creates a dimensional tile aesthetic. QueenTile describes its profiles as a multilayer system with coated steel, natural stone granules, an acrylic binder, and a protective glaze.
Some homeowners use “metal shingles” as a general term. QueenTile is more accurately described as a stone-coated steel tile system with profile-specific shapes.
Choose a QueenTile Profile
QueenTile Verona
Verona creates a Mediterranean barrel-tile appearance suited to Spanish, Mediterranean, and Florida-inspired architecture.
QueenTile Shake
QueenTile Shake recreates the depth and texture of wood shake with formed coated steel panels, creating a classic roof appearance without natural wood.
QueenTile Slate
QueenTile Slate recreates the dimensional appearance of natural slate. Confirm current U.S. availability, colors, and accessories when requesting a quote.
QueenTile’s published specifications list Verona at 5.42 pounds with 3.93 square feet of coverage, Shake at 5.95 pounds with 4.30 square feet of coverage, and Slate at 6.06 pounds with 4.89 square feet of coverage. That is approximately 1.2 to 1.4 pounds per square foot for the panels alone, before underlayment, fasteners, flashings, and other roofing system components.
Stone-Coated Steel vs. Asphalt Shingles and Clay Tiles
Traditional asphalt shingles usually cost less initially. Homeowners may choose stone-coated steel for its steel substrate, dimensional profiles, lighter panel weight, and long-term ownership potential.
Compared with conventional clay tiles or concrete tiles, QueenTile provides a similar tile aesthetic with much less panel weight. Every roof replacement still requires evaluation of the house, deck condition, slopes, flashing, ventilation, and complete proposed assembly.
Performance depends on the exact product, installation, exposure, and maintenance. We do not treat every metal roof, metal shingle, tile, or asphalt shingle as an interchangeable roofing material.
Stone-Coated Steel vs. Standing Seam
Both systems use steel but create different appearances.
Stone-coated steel uses smaller formed panels with overlapping details and profile-specific mechanical attachment. Fasteners are positioned according to QueenTile installation instructions and covered or located within the assembly as designed.
Standing seam metal roofing uses long vertical panels and concealed fasteners beneath raised seams. It creates cleaner, contemporary lines. Exposed fasteners are more common on certain ribbed panel systems and are not the defining feature of QueenTile or standing seam.
Stone-coated steel is generally selected when Orlando homeowners want a tile, wood shake, or slate appearance. Standing seam is more often selected for prominent vertical lines and a modern architectural style.
Compare both options on our residential metal roofing page.
Can a Metal Roof Qualify for an Insurance Discount?
A code-compliant roof covering may contribute to Florida wind-mitigation credits when the required features are documented, but stone-coated steel roofing does not automatically produce an insurance discount.
The amount, if any, is determined by the insurance carrier based on inspection results, supporting documentation, and other features of the home. Ask your insurer what documentation it requires before choosing a roofing system based on possible premium savings.
Can Stone-Coated Steel Go Over Existing Shingles?
Sometimes an approved reroofing assembly may allow installation over existing shingles, but it is not automatic.
The answer depends on existing roof layers, deck condition, moisture concerns, local requirements, manufacturer instructions, and the proposed assembly. A lightweight panel does not eliminate the need to evaluate what is already beneath the roof.
When tear-off is required, approved deck repairs can be completed before underlayment and the new roof are installed.
Start with a free roof inspection to determine whether repair, recover, or full replacement is appropriate. Fiddler’s currently advertises free roof inspections on its inspection page.
A Lightweight Roofing Material for Central Florida Homes
Stone-coated steel roofing offers a lightweight alternative to traditional clay and concrete tiles. QueenTile’s published panel weights are approximately 1.2 to 1.4 pounds per square foot before underlayment, fasteners, flashing, and other roofing system components are included.
Lightweight does not mean the roof can be placed over every existing structure without review. Fiddler’s Roofing inspects the deck, roof geometry, visible structural conditions, and applicable requirements before recommending an assembly.
This makes stone-coated steel worth considering for Central Florida homes where the owner wants a substantial tile aesthetic without automatically returning to conventional clay tiles.
Stone-Coated Steel Roofing for Hurricane Season
High-wind performance belongs to a complete roofing system—not one marketing wind-speed number.
QueenTile has published independent uplift testing for specific Verona and Shake assemblies. Those tested configurations achieved UL 580 Class 90 and a reported passing uplift pressure of 307 psf. The results apply only to the tested deck, underlayment, panel, fastener type, spacing, and attachment pattern; they should not be converted into a universal promise that every roof withstands 160 mph.
For an Orlando project, the selected roofing system must be matched to current Florida Building Code requirements, applicable product approval documentation, building height, exposure, roof zones, deck, and design pressures.
Installation quality is especially important around:
- Eaves and roof edges
- Corners
- Valleys
- Ridges and hips
- Walls
- Roof penetrations
- Flashing transitions
A tested metal roofing system can only deliver its intended performance when the approved materials and attachment details are properly installed.
What Does Stone-Coated Metal Roofing Cost?
Generic online ranges such as $12 to $18 per square foot do not accurately price an Orlando roof.
Installed cost depends on:
- Measured roof area
- QueenTile profile and color
- Material waste
- Tear-off and disposal
- Existing deck condition
- Required deck repairs
- Roof pitch and complexity
- Valleys, hips, walls, and penetrations
- Underlayment
- Flashing and accessories
- Attachment requirements
- Property access
- Permits and inspections
- Project scheduling
Use an inspection and written estimate. Roof financing options are available for qualified customers.
Our Stone-Coated Steel Installation Process
1
Free roof inspection and measurements
We review the existing roof, slopes, penetrations, visible deck conditions, access, and drainage details.
QueenTile profile and color selection
The homeowner compares Verona, Shake, Slate, available colors, accessories, and alternative metal roofing systems.
2
Written proposal
The scope identifies preparation, roofing material, accessories, price factors, and the expected project schedule.
Permit and HOA requirements
Responsibility for permit documents, product approvals, and any HOA submission should be identified in the proposal.
3
Roof preparation
The crew completes the agreed tear-off or preparation and addresses approved deck repairs.
Roofing system installation
Underlayment, flashing, QueenTile panels, ridges, hips, valleys, and accessories are installed to the specified details.
4
Final inspection and cleanup
The completed work is reviewed, project debris is removed, and required jurisdictional inspections are completed as applicable.
Many residential projects take several working days, but a universal two-to-four-day schedule is not responsible. Size, complexity, weather, hidden deck damage, permit inspections, materials, and access can change the timeline.
Is Stone-Coated Steel Roofing Low Maintenance?
A stone-coated steel roof generally requires periodic rather than frequent maintenance. Inspections should focus on:
- Valleys and drainage paths
- Flashings and penetrations
- Ridges and hips
- Gutters
- Accumulated leaves or debris
- Areas affected by foot traffic
- Damaged coating or accessory components
- Valleys, hips, walls, and penetrations
- Underlayment
- Flashing and accessories
- Attachment requirements
- Property access
- Permits and inspections
- Project scheduling
Low maintenance does not mean maintenance-free.
QueenTile’s multilayer finish is intended to help protect the coated steel from corrosion and support long-term color retention. The formed steel panels are not subject to the same brittle cracking behavior as traditional clay tiles, but no roofing material is immune to storm damage, coating wear, fading, installation defects, or maintenance needs.
Before signing a roofing proposal, review both:
- The current QueenTile manufacturer warranty
- The separate Fiddler’s Roofing workmanship warranty
These documents may have different coverage periods, exclusions, maintenance requirements, transfer provisions, and claim procedures.
How Long Does a Stone-Coated Steel Roof Last?
Stone-coated steel roofing is designed for decades of service. QueenTile publishes a 50-year manufacturer warranty, while the actual lifespan of a stone-coated steel roof depends on installation quality, roof design, ventilation, environment, maintenance, repairs, and storm exposure. Manufacturer warranty length and expected roof life are related, but they are not the same thing.
Can Stone-Coated Steel Lower Cooling Costs and Energy Bills?
Reflective roof colors and finishes may reduce solar heat gain at the roof surface and help lower cooling demand during hot Central Florida summers. Fiddler’s Roofing does not promise a fixed 10% to 25% reduction because actual energy performance depends on:
- Roof color and surface properties
- Insulation
- Attic ventilation
- Air sealing
- Orientation and shade
- HVAC efficiency
- How the home is used
Why Choose Fiddler’s Roofing?
Fiddler’s Roofing has served Central Florida since 2003 and provides metal roof installation, replacement, inspections, financing, repairs, and other residential roofing services.
We evaluate the property before recommending stone-coated steel, standing seam, metal shingles, asphalt shingles, or another roofing material.
The proposal explains:
- Selected materials
- Preparation and installation scope
- Manufacturer warranty
- Workmanship warranty
- Estimated schedule
- Permit responsibilities
- Project-specific exclusions
- Payment and financing terms
Stone-Coated Steel Roofing Projects in Central Florida
Each project should identify the city, property type, QueenTile profile, color, and replacement scope.
Browse our roofing gallery to compare roof styles, profiles, flashing details, and completed metal roofing projects.
Fiddler’s Roofing serves:
Stone-Coated Steel Roofing FAQs
Does QueenTile Have a Class 4 Impact Rating?
Some stone-coated steel roofing products may carry a Class 4 impact-test rating, but the rating must be verified for the exact QueenTile profile and current U.S. product documentation. Fiddler’s Roofing will not apply one Class 4 claim to every QueenTile roofing system without product-specific confirmation.
Can a QueenTile Roof Withstand 160-MPH Winds?
No single speed applies to every property.
Wind performance depends on the tested assembly, attachment pattern, roof zones, building height, exposure, deck, and project-specific design pressures. Published laboratory results should be matched to the actual assembly being installed.
Is Stone-Coated Steel Quieter Than Standing Seam?
The textured stone surface can reduce the metallic sound associated with bare panels. Interior sound also depends on the deck, underlayment, attic, insulation, ceiling assembly, and building design. QueenTile’s manufacturer FAQ attributes part of its sound-reduction performance to the natural basalt-granule surface.
Is QueenTile a Type of Metal Shingle?
“Metal shingles” is a broad market term. QueenTile is a stone-coated steel tile system offered in profiles designed to resemble tile, wood shake, and slate.
5.0
180+ reviews
Request a Free Estimate
Ready to compare QueenTile Verona, Shake, Slate, and standing seam?
Schedule a free roof inspection with Fiddler’s Roofing. We will review the property, explain the available roofing systems, and prepare a clear estimate for your Orlando stone-coated steel roofing project.